Middle East Fastener Supplier | Petrochemical Studs & High-Salt Service Bolts
Serving Gulf petrochemical, power and construction markets: ASTM A193 B7 / A194 2H flange studs, A320 L7 low-temperature studs, and Dacromet or hot-dip high-strength bolts for desert heat and salt. Heat-number mill certificates and third-party test reports ship with every batch; CO certificates and Arabic document requirements are supported.
Market Key Data
| Market Focus | Petrochemical flanges · Power & desalination · Desert infrastructure |
| Certification Support | Mill test report by heat · SGS/BV inspection · CO |
| Corrosion Basis | Dacromet 500-1000 h+ / HDG 1000 h+ salt spray |
| Languages | English · Chinese (Arabic docs on request) |
| Key Ports | Jebel Ali · Dammam · Doha |
Key Industries
Refinery units and pipe racks — B7/2H studs on the ASME B16.5 inch system; B7M/2HM for sour service
Power and desalination — 316/A4 stainless and Dacromet parts against chloride attack
Outdoor steelwork and solar trackers — HDG/Dacromet high-strength bolts for desert heat and sand
Oilfield surface equipment — 10.9/12.9 bolts supplied with heat-treatment and hardness records
Xin Rui Da Supply Programme
Closed inch-system supply: B7 studs + 2H nuts + washers as ASTM sets with heat-number mill certificates for project acceptance and traceability
Desert salt-spray protection: Dacromet (hydrogen-free) by default, hot-dip for severe cases, contract-stated hours (e.g. 720 h per ISO 9227)
Third-party inspection: SGS/BV or video inspection, batch tensile/hardness reports with every shipment
Document set: CO certificate of origin, standardized packing list and invoice, IPPC-marked wooden packing
Frequently Asked Questions
Traceability to heat number is the core: every batch ships with a mill certificate showing heat number and heat-treatment record; B7M/2HM additionally requires 100% hardness inspection (max 235 HB) for NACE MR0175 sour service. Substituting commodity DIN parts breaks the system and usually fails acceptance.
Yes. Surface temperatures easily exceed 120°C outdoors, the ceiling at which nylon inserts age fast. Hot-zone joints should use DIN980 all-metal lock nuts, serrated flange hardware, or heat-rated threadlockers.
Both clear the salt-spray bar (HDG 1000 h+, Dacromet 500-1000 h+). The difference is thread fit and hydrogen: HDG adds 50-100 um and needs 0.2-0.4 mm oversize nuts, while Dacromet at 4-10 um fits standard threads and is hydrogen-free - safer on 10.9+ hardware.
Get Grade Selection & Quotation for Middle East Fastener Supplier | Petrochemical Studs & High-Salt Service Bolts
Send the standard, size and length, class and finish and quantity — engineers reply with selection advice and FOB / CIF pricing within 24 hours.